欧美丰满性感爆乳美女

Category Archives: 產品

SXB系列69程控測試儀????

Program control tester

工作頻率 ?13-23GHz

Operating frequency: 13-23ghz

  • 適用于通信系統MIMO信道場景模擬測量
    It is suitable for MIMO channel scene simulation measurement of communication system
  • 4×4通道獨立調節
    4×4 channel independent regulation
  • 便攜性
    portability
  • 支持LAN遠程控制
    Support LAN remote control

參數性能Electrical Specification

參數 parameter典型值 Specification
輸入頻率范圍 Frequency Range?(GHz)13/15/18/23
輸入功率范圍 Power Handing(dBm)<35
信號輸入帶寬band width(MHz)>112M
插損 Insertion Loss (dB)31dB
駐波比VSWR1.3
可調衰減范圍 Attenuation Range (dB)0~30
可調衰減步進 Attenuation Step(dB)1
可調衰減精度 Attenuation accuracy (dB)±0.5
移相范圍 Phase Shift Range (°)0~360
移相步進 Phase Shift Step (°)5.6
移相器精度 Phase accuracy (°)±2.5
功分器隔離度Isolation(dB)36
時延 Time Delay between different path16條信道的時延差小于0.01ns
群延時Group Delay112M帶內小于3ns
以上指標為典型值,此系列產品部分參數可定制
The above indicators are typical values, and some parameters of this series of products can be customized

規格特性Mechanical Specification

規格Description特性Specification
射頻接口RF interface8*SMA-Female
尺寸Physical Size190mm*160mm*160mm
重量Weight2kg
電源Power interface市電接口Mains plug
功耗Power8W

說明?Notes

該產品為華為技術有限公司合作產品,此產品僅為華為技術有限公司提供

This product is a cooperative product of huawei technologies co., LTD. This product is only provide to huawei technologies co., LTD


8毫米收發系統65

Millimeterwave transceiver system ???

工作頻率 ?32.0~38.0 GHz

Working frequency: 32.0 ~ 38.0ghz

適用于托卡馬克等離子體裝置

Suitable for tokamak plasma device

  • 毫米波頻段
    Millimeter wave band
  • 4頻道信號采用相同通道同步工作
    Channel 4 signal USES the same channel to work synchronously
  • 多達128路獨立的I/Q接收信號接口
    Up to 128 independent I/Q receiving signal interfaces
  • 接收信號幅度可單獨調節
    The receiving signal amplitude can be adjusted separately
  • 標準19英寸機箱
    Standard 19-inch case

8毫米收發系統由一臺發射單元、兩臺接收單元組成,各單元采用獨立19英寸機箱,通過高頻微波電纜連接,直接產生多個頻率的毫米波發射信號,并同時將不同頻率多個通道接收信號獨立下變頻至I/Q輸出。

8 mm transceiver system by a transmission unit, two units, each unit adopts independent 19 inch case, through the high frequency microwave cable connection, directly produce multiple frequency millimeter wave signal, and at the same time, the different frequency multiple channel signals under the independent variable frequency to the I/Q output.

 

66 67

 

 

 

 

 

接收單元?Receiving unit

  • 每臺接收機具備8個獨立的通道
    Each receiver has eight separate channels
  • 每個通道微波接收端口獨立,同步接收4頻道信號
    Each channel microwave receiving port is independent and receives 4 channel signal synchronously
  • 各頻道抗擾抑制:優于35dB。
    Channel interference rejection: better than 35dB.
  • I/Q信號視頻帶寬:500kHz
    Video bandwidth of I/Q signal: 500kHz
  • I/Q信號視頻增益:0-20dB可調
    Video gain of I/Q signal: 0-20db tunable

發射單元 ?Launch unit

  • 四頻道同步工作
    Channel 4 works synchronously
  • 工作頻率覆蓋:32.0~38.0GHz
    Working frequency coverage: 32.0 ~ 38.0ghz
  • 四頻道獨立選通開關,可單獨工作
    4 channel independent selector switch, can work independently
  • 每個頻點的功率調節動態范圍:15dB
    Power adjustment dynamic range at each frequency point: 15dB
  • 發射微波相位噪聲:優于-80dBc/[email protected]
    Transmitting microwave phase noise: better than -80dbc/[email protected]

說明 Notes

該產品為定制設計產品,詳細細節請聯系廠家

This product is custom-designed. Please contact the manufacturer for details


61

C波段激勵源系統

C Band RF driver?system ??

工作頻率 ?3.7 GHz

Operating frequency: 3.7 GHz

  • 適用于托卡馬克等離子體裝置
    Suitable for tokamak plasma device
  • 連續波輸出輸出功率10W×8通道
    Continuous wave output power 10W x 8 channels
  • 各通道相位360°可調
    Each channel phase 360 ° is adjustable
  • 標準19英寸機箱
    Standard 19-inch case

 

3.7GHz微波激勵源由頻率源單元、現場控制器單元、功分器單元、功放單

元組成,各單元采用獨立19英寸2U機箱,通過高頻微波電纜和ST光纖連接。

3.7GHz microwave excitation source consists of frequency source unit, field controller unit, power divider unit and power amplifier unit

The unit is composed of 19 “2U chassis, connected by high frequency microwave cable and ST optical fiber.

63

遠程開關響應曲線 Remote switching response curve

62

頻譜曲線 Spectrum curve

 

 

 

 

 

  • 采用內部高精度基準源,輸出頻率精度優于5×10-8
    Using internal high precision reference source, the output frequency precision is better than 5 x 10-8
  • 輸出頻率具有高穩定性
    The output frequency is highly stable
  • 低相噪低雜散的輸出信號
    Low phase noise low stray output signal
  • 輸出功率最大可達連續波10W
    The maximum output power can reach 10W continuous wave
  • 寬線性區工作,可配合功率控制系統實現實時功率控制
    Wide linear zone can be used to realize real – time power control with power control system
  • 可在連續波模式工作,亦可通過外部觸發信號在脈沖模式工作
    It can work in continuous wave mode, or it can work in pulse mode through external trigger signal
  • 輸出功率具有高穩定性
    The output power is highly stable
  • 每路信號具備獨立的數字式移相功能,可在0~360°調節,調節步長8°
    Every road signals have independent digital phase-shifting function, can be adjusted in 0 ~ 360 °, adjust step 8 ° 64
  • 64以太網通信遠程控制功能
    Ethernet communication remote control function
  • 遠程關斷功能
    Remote shutdown function
  • 遠程相位控制功能
    Remote phase control function
  • 現場功率控制功能
    Field power control function
  • 遠程功率控制功能
    Remote power control function
  • 遠程功率檢測功能
    Remote power detection function
  • 遠程工作狀態監測功能
    Remote working status monitoring function

說明 Notes

該產品為定制設計產品,詳細細節請聯系廠家

?Notes

This product is custom-designed. Please contact the manufacturer for details


SDAT-17-160

程控衰減器??Programmable?attenuator ??

工作頻率 ?3-32GHz

Operating frequency: 3-32ghz

  • 適用于通信系統場景模擬測量
    Suitable for communication system scene simulation measurement
  • 寬帶覆蓋
    Broadband coverage
  • 高速連續衰減調節
    High speed continuous attenuation control
  • 支持LAN遠程控制
    Support LAN remote control

SDAT-17-1參數性能

?參數 parameter典型值 Specification
輸入頻率范圍 Frequency Range?(GHz)3~32
輸入功率范圍 Power Handing(dBm)<35
信號輸入帶寬band width(MHz)>112M
插損 Insertion Loss (dB)5dB typ.
駐波比VSWR1.5
可調衰減范圍 Attenuation Range (dB)0~30
可調衰減步進 Attenuation Step(dB)0.1
可調衰減精度 Attenuation accuracy (dB)±0.1
衰減調節速率 Attenuation adjustment rate (dB/s)1~300①
通道數量 number of channels1
以上指標為典型值,此系列產品部分參數可定制

① 衰減調節速率在可編程環境下可依定需求靈活設定,衰減量在調節過程中為線性變化

The above indicators are typical values, and some parameters of this series of products can be customized
① The attenuation adjustment rate can be set flexibly according to the fixed demand in programmable environment, and the attenuation is a linear change in the adjustment process

SDAT-17-1規格特征

?規格Description特性Specification
射頻接口RF interface2*SMA-Female
尺寸Physical Size180mm*100mm*50mm
重量Weight1kg
電源Power interface市電接口Mains plug
功耗Power5W
說明 Notes
該產品為華為技術有限公司合作產品,詳細細節請聯系廠家

This product is a cooperative product of huawei technology co., LTD. Please contact the manufacturer for details

 


SDAT-459

程控衰減器??Programmable?attenuator ??

工作頻率 ?X-band/Ku-band

  • 適用于通信系統場景模擬測量
    Suitable for communication system scene simulation measurement
  • 4個同步通道
    4 synchronous channels
  • 高速連續衰減調節
    High speed continuous attenuation control
  • 支持LAN遠程控制
    Support LAN remote control

SDAT-4參數性能

參數 parameter典型值 Specification
輸入頻率范圍 Frequency Range?(GHz)12~14 ①
輸入功率范圍 Power Handing(dBm)<35
信號輸入帶寬band width(MHz)>112M
插損 Insertion Loss (dB)5dB typ.
駐波比VSWR1.5
可調衰減范圍 Attenuation Range (dB)0~30
可調衰減步進 Attenuation Step(dB)0.1
可調衰減精度 Attenuation accuracy (dB)±0.1
衰減調節速率 Attenuation adjustment rate (dB/s)1~300②
通道數量 number of channels4③
以上指標為典型值,此系列產品部分參數可定制
① 衰減器可根據需求訂制,SDAT系列產品可覆蓋至最高40GHz更多工作頻段
② 衰減調節速率在可編程環境下可依定需求靈活設定,衰減量在調節過程中為線性變化
③ 衰減器可根據需求選擇不同通道數量版本

The above indicators are typical values, and some parameters of this series of products can be customized
①The SDAT series products can cover up to 40GHz more working frequencies
②The attenuation adjustment rate can be flexibly set in programmable environment according to the demand of certain information
③Depending on the requirements, the torque attenuator can select a different number of channel versions

SDAT-4規格特征

規格Description特性Specification
射頻接口RF interface8*SMA-Female
尺寸Physical Size45mm*160mm*110mm
重量Weight1kg
電源Power interface市電接口Mains plug
功耗Power5W
說明 Notes
該產品為華為技術有限公司合作產品,詳細細節請聯系廠家
This product is a cooperative product of huawei technology co., LTD. Please contact the manufacturer for details


SDAT-P258

大功率程控衰減器??High power attenuator ??

工作頻率 ?2-6GHz

Operating frequency: 2-6GHz

  • 適用于加速器固放功率調節
    It is suitable for the solid power adjustment of accelerator
  • 可承載1.5kW峰值功率
    Capable of carrying 1.5kw peak power
  • 抗干擾
    anti-interference
  • 標準19英寸3U機箱
    Standard 19-inch 3U case

SDAT-P2典型指標

型號 model工作頻率
Frequency(MHz)
最低
FL
工作頻率
Frequency(MHz)
最高
FU
插入損耗 insertion loss
(dB)
功率調節范圍 controlling power range
(dB)
功率調節精度power of regulation precision
(dB)
最大連續功率
continuous maximum rating
(W)
最大峰值功率 Maximum peak power
(W)
SDAT-P2200060001300.01100[email protected]%占空比( duty ratio)100us脈寬(pulse width)
說明 Notes
以上指標為典型值
The above indicators are typical values
  • 2組N型連接器,可提供2通道大功率信號功率調節
    2 sets of N connector, can provide 2 channel high power signal power adjustment
  • 支持LAN遠程控制監測方式
    Support LAN remote control monitoring mode
  • 通過精密電機組件實現的機械功率調節功能,具有良好的抗干擾特性
    The mechanical power adjustment function realized by precise motor assembly has good anti-interference characteristics
  • 適用于輻照環境機房的遠程功率調節方案
    It is suitable for remote power adjustment scheme of irradiation environment machine room
  • 支持01dB精度的實施功率連續調節功能
    Support 01dB precision to implement continuous power regulation function

說明 Notes

該產品為定制設計產品,詳細細節請聯系廠家

This product is custom-designed. Please contact the manufacturer for details


XGD-6光電轉換器

Photoelectric converter

56

  • 適用于同步脈沖信號的光傳輸轉換
    Suitable for optical transmission and conversion of synchronous pulse signal
  • 極低的抖動誤差和延遲
    Very low jitter error and delay
  • 寬適應范圍
    Wide range of adaptation
  • 6通道光電轉換
    6 channel photoelectric conversion
  • 標準19英寸1U機箱
    Standard 19-inch 1U case

    XGD-6典型指標

    ?型號光信號接口電信號接口適配光纖最大傳輸速率響應延時抖動誤差功耗
    XGD-6STBNC62.5/125um160Mb100ns<1ns5W
    說明 Notes
    以上指標為典型值
    The above indicators are typical values
57

光-電轉換 輸出信號曲線 上升沿3ns下降沿3ns 幅度5V The output signal curve of photoelectric conversion goes up along 3ns and down along 3ns and 5V

 

 

 

 

 

 

說明 Notes

該產品為定制設計產品,詳細細節請聯系廠家

This product is custom-designed. Please contact the manufacturer for details

 


XGD-2光電/電光轉換器

XGD-2 photoelectric/electro-optical converter51

  • 適用于同步脈沖信號的光傳輸轉換
    Suitable for optical transmission and conversion of synchronous pulse signal
  • 極低的抖動誤差和延遲
    Very low jitter error and delay
  • 寬適應范圍
    Wide range of adaptation
  • 鋁合金機殼
    Aluminum alloy casing

XGD-2典型指標

型號 model光信號接口
Optical signal interface
電信號接口
Electrical signal interface
適配光纖
Adaptive optical fiber
最大傳輸速率
Maximum transmission rate
響應延時
Response latency
抖動誤差
Jitter error
功耗
Power consumption
XGD-2STBNC62.5/125um 160Mb100ns<1ns1W
說明 Notes
以上指標為典型值
The above indicators are typical values
53

電-光-電轉換 響應延時曲線 響應延時31ns Response delay curve of electro – optical – electrical conversion response is 31ns

 

接口 Interface:

52

 

 

 

 

 

 

 

55

光-電轉換 輸出信號曲線 上升沿3ns下降沿3ns 幅度5V The output signal curve of photoelectric conversion goes up along 3ns and down along 3ns and 5V

54

 

 

 

 

 

 

 

 


IFCM4D1U-P25

射頻前端??RF Front end???68

工作頻率 ?P波段

Working frequency: P band

  • 適用于超導加速器低電平前端
  • 可實現上下頻率轉換
    Up and down frequency conversion can be realized
  • 可兼容CPCI或 VPX標準
    Compatible with CPCI or VPX standards
  • 程控增益調節
    Programmed gain adjustment
型號
Part Number
工作頻率
Frequency(MHz)
射頻
RF
工作頻率
Frequency(MHz)
中頻
IF
典型增益
Gain (dB)
范圍
典型增益
Gain (dB)
調節精度
輸出功率
1dB compr.
(dBm)
通道隔離度
(dB)
本振輸入需求
Lo
(dBm)
工作電壓 Voltage(V)工作電流 Current max.(mA)
IFCM4D1U-162-25

162.5
25-5~150.510.080
80
07~9500
IFCM4D1U-325-2532525-5~150.510.08007~9500
IFCM4D1U-650-2565025-5~150.510.08007~9500
說明 Notes
以上指標為典型值,此系列產品部分參數可定制
The above indicators are typical values, and some parameters of this series of products can be customized
  • 4個下變頻通道
  • 4 down-conversion channels
  • 1個上變頻通道
  • 1 up-conversion channel
  • 極低的附加抖動惡化
  • Extremely low additional jitter deteriorates
  • 支持不低于02°精度的采集
  • Support of no less than 2 ° acquisition precision

說明 Notes

該產品為定制設計產品,詳細細節請聯系廠家

This product is custom-designed. Please contact the manufacturer for details


射頻前端??RF Front end???47

工作頻率 ?1.3GHz

Working frequency: 1.3GHz

  • 適用于超導加速器低電平前端
    Suitable for low level front end of superconducting accelerator
  • 可實現上下頻率轉換
    Up and down frequency conversion can be realized
  • 可兼容CPCI VPX標準
    Compatible with CPCI VPX standard
  • 程控增益調節
    Program-controlled gain adjustment

IFCM4D1U-1300-4典型指標

型號
Part Number
工作頻率
Frequency(MHz)
射頻
RF
工作頻率
Frequency(MHz)
中頻
IF
典型增益
Gain (dB)
范圍
典型增益
Gain (dB)
調節精度
輸出功率
1dB compr.
(dBm)
通道隔離度
(dB)
本振輸入需求
Lo
(dBm)
工作電壓 Voltage(V)工作電流 Current max.(mA)
IFCM4D1U-1300-40 130040-5~150.510.080
80
07~9500
IFCM4D1U-1300-20 1300 20-5~150.510.0800 7~9 500
說明 Notes
以上指標為典型值,此系列產品部分參數可定制
The above indicators are typical values, and some parameters of this series of products can be customized
49

上變頻輸出信號頻譜曲線 Upper frequency output signal spectrum curve

50

下變頻輸出信號頻譜曲線 Lower frequency output signal spectrum curve

48

環境溫度?+25° C,

The environment temperature?+25° C,

工作電壓?+7.5V

Operating voltage + 7.5v

 

 

  • 4個下變頻通道
    4 down-conversion channels
  • 1個上變頻通道
    1 up-conversion channel
  • 極低的附加抖動惡化
    Extremely low additional jitter deteriorates
  • 支持不低于02°精度的采集
    Support of no less than 2 ° acquisition precision

說明 Notes

該產品為定制設計產品,詳細細節請聯系廠家

This product is custom-designed. Please contact the manufacturer for details


欧美丰满性感爆乳美女 三分彩预测 大乐透周一走势图 体彩吉林十一选五 双色球复式投注过滤工具 澳门3颗豹子赔多少倍 坑爹游戏史小坑土地神 三d走势图 快乐十分稳赚秘籍 学什么特色小吃赚钱 福利彩票3d复式组三 时时彩码倍投方案 电子竞技最新资讯 群英会开奖走势图 6码复式三中三论坛 北京5分彩官网开奖 大排列三走势图